Industry recommends high-pressure self tightening flanges 2024-05-28

Chemical industry pipelines often experience leakage and leakage during long-term use, posing safety hazards that are difficult to cure. On July 4-5, at the Qingdao University of Science and Technology Lanshi Heavy Equipment (5.040, ± -0.02, ± 0.40%) company's cutting-edge technology exchange meeting held in Lanzhou, the high-pressure self tightening flange ZY-LOC was launched, which can become a solution to the problems of chemical pipeline leakage and external leakage. Zhang Pulin, Chairman of Lanshi Heavy Equipment Co., Ltd., stated that Lanshi Heavy Equipment and Qingdao University of Science and Technology have jointly launched a new pipeline connection technology, the high-pressure self tightening flange ZY-LOC, through industry university research cooperation. This technology has solved industry problems and achieved mutual promotion and a virtuous cycle between university technology platforms and equipment manufacturing enterprises. According to Xu Zhi, the general manager of Lanzhou Lanshi Zhiyuan Machinery Technology Co., Ltd., there are only four similar products of high-pressure self tightening flanges worldwide. Although the basic principles are the same, the ZY-LOCT ring has a longer T-shaped arm and stronger bending and torsion resistance. He introduced, "ZY-LOC products have a diameter of DN15~DN1000, a pressure PN ≤ 150MPa, a temperature of -196 ℃~800 ℃, and are suitable for various high and low temperature environments and different forms of media The former deputy commander of a certain navy fleet proposed suggestions for the new flange products: firstly, the conditions of the offshore platform are harsh, and the products must meet or exceed the quality level of foreign flanges under the same material and process of homogeneity; Secondly, all tank outlet connections must address leakage issues to ensure that the entire project pipeline is leak free; The third is to achieve mass production as soon as possible to reduce flange prices. Qin Youfu, the project manager of Sinopec Engineering Construction Company, introduced the application of ZY-LOC. The high-pressure self tightening flange used in the Shenhua coal direct liquefaction unit has been in good condition for 13 years and is still leak free. After adopting ZY-LOC in the reforming unit of Anqing Petrochemical, there have been no further leaks caused by gasket damage. Afterwards, Jiujiang Petrochemical, Qingdao Refining and Chemical, Guangzhou Petrochemical, Jinling Petrochemical, Qilu Petrochemical, and Zhenhai Petrochemical also adopted ZY-LOC in large-scale petrochemical projects. Lu Huiming, the head of the Middle East region of the Industrial Development Promotion Association of the National Development and Reform Commission, believes that due to the excellent technology of ZY-LOC products and the recognition of Chinese manufacturing by overseas enterprises, ZY-LOC will have good application prospects in oil producing countries in the Middle East.

Applicable fields of manholes 2024-05-28

　　1. Municipal engineering: Manholes play an important role in municipal engineering, such as sewer systems, sewage treatment plants, rainwater collection tanks, etc., to facilitate pipeline maintenance, dredging, and upkeep, ensuring normal operation and maintenance. 　　2. Industrial and mechanical equipment: Manholes are also widely used in industrial fields and mechanical equipment, such as petroleum, chemical, energy and other industries, to provide convenience for equipment maintenance, upkeep, ventilation and exhaust. 　　3. Roads and traffic: Manholes are widely used in traffic areas such as roads, roads, and sidewalks. They provide convenient personnel access and allow for maintenance, inspection, and cleaning of underground pipelines. 　　4. Public facilities: Many public facilities require manholes for personnel access and maintenance operations, such as power supply, communication lines, gas pipelines, etc. Manholes can provide safe and reliable access points to ensure the normal operation of these facilities. 　　5. Buildings: In buildings, manholes are often used in basements or underground spaces to provide access for personnel to enter and maintain underground equipment and pipelines. They can also be used in exhaust systems, heating systems, and water supply systems.

Market demand analysis and outlook for stainless steel pipe fittings in 2024 in the post pandemic era 2024-05-28

　　With the gradual control of the global epidemic, various industries have entered the stage of recovery, and the stainless steel pipe fittings market has also shown unprecedented growth momentum. In 2024, the demand for stainless steel pipe fittings is rising rapidly, indicating that the dividends of the post pandemic era have already emerged. 　　1、 Market demand analysis 　　Since the outbreak of the epidemic, the global supply chain has been severely impacted, and the stainless steel pipe fittings industry is no exception. However, with the effective control of the epidemic and the gradual recovery of economies in various countries, there is a huge demand for stainless steel pipe fittings due to infrastructure construction, manufacturing upgrading, and the development of new energy fields. Especially in emerging markets such as China and India, there is a strong demand for high-quality and high-performance stainless steel pipe fittings. 　　2、 Industry Development Trends 　　Currently, the stainless steel pipe fittings industry is facing an important opportunity for transformation and upgrading. On the one hand, with the continuous advancement of technology, the manufacturing process and material properties of stainless steel pipe fittings have been significantly improved, greatly enhancing the service life and safety performance of products. On the other hand, environmental protection and sustainable development have become a global consensus, and stainless steel pipe fittings are becoming increasingly widely used in the fields of green buildings and clean energy due to their corrosion resistance, recyclability, and other characteristics. 　　3、 Market Outlook 　　Looking ahead, the stainless steel pipe fittings market will continue to maintain strong growth momentum. On the one hand, the global economic recovery will drive increased investment in infrastructure construction, providing more development opportunities for the stainless steel pipe fittings industry. On the other hand, the rapid development of new energy, environmental protection and other fields will open up new market space for the stainless steel pipe fittings industry. Meanwhile, with the advancement of technological innovation and industrial upgrading, the competitive landscape of the stainless steel pipe fittings industry will undergo profound changes, and survival of the fittest will become the norm. 　　In summary, in the post pandemic era of 2024, the demand for stainless steel pipe fittings market will continue to be strong, and the industry has broad prospects. For enterprises, seizing market opportunities, increasing technological innovation and product upgrades, and improving product quality and service levels will be the key to winning market competition. At the same time, attention should also be paid to environmental protection and sustainable development trends, promoting enterprises to achieve green transformation and sustainable development.

Manufacturing process of forged socket three-way connectors by manufacturers 2024-05-28

　　Forging high-pressure tees, broadly known as "forging", is a broad concept that refers to the manufacturing of pipes, plates, and forgings as raw materials. Its manufacturing method includes almost all the forming processes of pipe fittings. When it comes to specific varieties (including all varieties of socket welding and threaded fittings, branch fittings, and other fittings that require forging, such as thick walled forged tees), the so-called "forging" corresponds to the English word "forged", which refers to fittings that are mainly formed by forging. The content mentioned here refers to the latter type of forging. According to the different varieties and requirements of pipe fittings, forging of pipe fittings mainly adopts forging, free forging, and cutting forming processes. The common forging method has large burrs and consumes materials. In order to reduce material consumption, some pipe manufacturers have begun to use forming processes without burrs, achieving good results. This section mainly introduces the process of forging, free forging, and cutting to manufacture pipe fittings. 　　The high-pressure tee is finely forged, with a smooth surface, acid, alkali, and high temperature resistance. The price calculation is reasonable, the appearance is beautiful, and the texture and performance are strong. Its main function is to change the direction of the fluid. Having three openings, namely one inlet and two outlets; A type of chemical pipe fitting with two inlets and one outlet, which can be T-shaped or Y-shaped, with equal diameter pipe openings and reducing diameter pipe openings, used for the convergence of three identical or different pipelines. 　　Forging tee quenching aging: the phenomenon of the performance of forging tees changing over time after rapid cooling at high temperatures. The carbon content, degree of deoxidation, and nitrogen content in steel have a significant impact on quenching aging. Boiling steel with low forging and insufficient deoxidation, as well as steel with high nitrogen content, undergo significant quenching aging. For medium forging with a carbon content of about 0.3%, the performance changes caused by quenching aging have been greatly reduced, while high forging with a carbon content of about 0.6% does not actually have an aging hardening effect. 　　Alloy tee manufacturer 　　Due to the usually thick wall thickness of forged high-pressure tee pipes, the commonly used testing method for forged alloy tees is ultrasonic flaw detection. This method can effectively detect the welding quality at the root and inside of the weld, and can also be used to detect the development of existing weld defects, thus determining the importance of surface testing of the weld. Generally, the material of high-pressure tee welds is ferromagnetic material, so magnetic particle flaw detection should be used for surface testing of forged socket tee welds. Another method for detecting the surface of weld seams is dye penetrant testing, which requires the welding waves of the weld seam to be polished smooth before implementation. The dye penetrant testing method is more suitable for detecting the surface of weld seams. 　　In the manufacturing industry of forged three-way pipe fittings, the broad concept of "forging" refers to the production of pipes, plates, and forgings as raw materials, and its manufacturing method includes almost all the forming processes of pipe fittings. When it comes to specific varieties (including all varieties of socket welding and threaded fittings, branch fittings, and other fittings that require forging, such as thick walled forged tees), the so-called "forging" corresponds to the English word "forged", which refers to fittings that are mainly formed by forging. The content mentioned here refers to the latter type of forging. According to the different varieties and requirements of pipe fittings, forging of pipe fittings mainly adopts forging, free forging, and cutting forming processes. 　　Manager Zhang of Hebei Yutuo Pipeline Equipment Co., Ltd. produces forged pipe fittings mainly including forged tees, forged elbows, forged flanges, forged pipe caps, etc. The appearance is beautiful, the price is low, and the material can be customized according to customer needs. We always believe that only high-quality products can attract more customers. The forged equal diameter tee manufacturer welcomes customers to come and consult and visit- 　　Forged pipe fittings - In the pipe fittings manufacturing industry, it refers to the production of pipes, plates, and forgings as raw materials, and its manufacturing method includes almost all the forming processes of pipe fittings. When it comes to specific varieties (including all varieties of socket welding and threaded fittings, branch fittings, and other fittings that require forging, such as thick walled forged tees), the so-called "forging" refers to fittings that are mainly formed by forging. The content mentioned here refers to the latter type of forging. 　　Hydraulic bulging of tees is a forming process that uses axial compensation of metal materials to expand branch pipes. The process involves using a dedicated hydraulic press to inject liquid into a tube blank with a diameter equal to that of the tee, and synchronously moving the two horizontal side cylinders of the hydraulic press to compress the tube blank. After the tube blank is compressed, its volume decreases, and the pressure of the liquid inside the tube blank increases as the volume of the tube blank decreases. When the pressure required for the tee branch pipe to expand is reached, the metal material flows along the mold cavity under the dual action of the side cylinder and the liquid pressure inside the tube blank to expand the branch pipe. 　　Forging tee manufacturer 　　The hydraulic bulging process of three-way can be formed in one go, with high production efficiency; The thickness of the supervisor and shoulder wall of the three-way joint has increased.

Production standards and quality requirements for forging tees 2024-05-28

　　1、 Standard specifications 　　There are many standards and related specifications for forging tees both domestically and internationally, with commonly used ones including ASTM, ASME, JIS, GB, etc. ASTM and ASME are American standards, JIS is Japanese standard, and GB is Chinese national standard. When purchasing forged tees, corresponding standards and specifications should be selected according to the usage environment and requirements. 　　2、 Material requirements 　　The material for forging tees can be carbon steel, alloy steel, stainless steel, etc. The selection of materials should be based on factors such as working environment, temperature, pressure, etc. At the same time, factors such as weldability, processability, and corrosion resistance of the material also need to be considered. 　　3、 Manufacturing process 　　The manufacturing process of forging tees mainly includes forging and processing. The forging process includes hot forging, cold forging, and semi hot forging. Processing techniques include turning, stamping, drilling, milling, etc. The manufacturing process requires attention to factors such as material temperature control, mold accuracy, and the sequence of processing techniques. 　　4、 Appearance inspection 　　Forged tees require visual inspection during the production process. Mainly inspect for appearance defects, cracks, inclusions, holes, and other defects. At the same time, it is necessary to check whether the shape, size, wall thickness and other factors of the pipe fittings meet the standard requirements. 　　5、 Mechanical performance testing 　　Forging tees requires mechanical performance testing. Mainly including the detection of factors such as strength, plasticity, toughness, etc. By testing the mechanical properties, the reliability and durability of forged tees can be ensured. 　　【 Conclusion 】 　　Forged tees are commonly used pipe fittings in pipeline connections and play an important role. During the production process, forging and processing should be strictly carried out in accordance with standards and specifications to ensure product quality. In addition, it is necessary to conduct visual inspection and mechanical performance testing to ensure the reliability and durability of the product.